Graco E-Flo DC Series Instructions Manual page 35

Setup Screen Screen 6 6 6
Setup Setup Screen
Use this screen to view the grand totalizer value and
set or reset the batch totalizer.
Figure 34 Setup Screen 6
Figure 35 Reset the Totalizer
Setup Setup Screen Setup
Grand Totalizer - displays the current
grand total of pump cycles. Not
resettable.
Batch Totalizer - displays the batch total
in selected volume units.
Reset Batch Totalizer - resets the batch
totalizer to zero.
3A3453H
Screen 6 6 6 Key Screen Key Key
Setup Screen Screen 7 7 7
Setup Setup Screen
Use this screen to set the desired maintenance
interval (in cycles) for each pump. The screen also
displays the current cycle count. An Advisory is
issued when the counter reaches 0 (zero).
Figure 36 Setup Screen 7
Setup Screen
Setup Setup
Set the desired maintenance interval (in
cycles) for each pump.
Operation
Screen 7 7 7 Key Key
Screen Key
35