Graco E-Flo DC Series Instructions Manual page 13

Table Table 3 3 3 Typical Table Typical Installation Typical Installation — — — Pump Installation
NON- - - HAZARDOUS HAZARDOUS LOCATION LOCATION
NON NON HAZARDOUS LOCATION
Key Key for Key for Table for Table Table 2 2 2 and and Table and Table 3 3 3 Table
A
Electrical Supply (must be sealed conduit
approved for use in hazardous locations)
B Fused Safety Switch, with lock
C Start/Stop Control (must be approved for
use in hazardous locations)
D Explosion Proof Conduit Seal. Required
within 18 in. (457 mm) of the motor for the
US and Canada.
3A3453H
Pump with Pump with Open with Open Wet Open Wet Cup Wet Cup Lower Cup Lower Lower
HAZARDOUS LOCATION LOCATION
HAZARDOUS HAZARDOUS LOCATION
E Fluid Pressure Gauge
F
Fluid Shutoff Valve
G Pump Ground Wire. Two ground terminals
are provided if local code requires redundant
grounding connections.
H Fluid Drain Valve
Installation
13