Graco E-Flo DC Series Instructions Manual page 18

Operation
Control Module Control Control Module Screens Module Screens Screens
The Control Module has two sets of screens:
Run and Setup. For detailed information see
Run Screens, page 25, and
Press to toggle between the Run screens and
the Setup screens.
18
Setup Screens, page 28.
Control Module Control Control Module Keys Module Keys Keys
The above image shows a view of the control module
display and keys.
NOTICE
NOTICE NOTICE
To prevent damage to the softkey buttons, do not
press the buttons with sharp objects such as pens,
plastic cards, or fingernails.
Table 4 explains the function of the membrane
keys on the control module. As you move through
the screens, you will notice that most information
is communicated using icons rather than words
to simplify global communication. The detailed
screen descriptions in Run Screens, page
Setup Screens, page 28, explain what each icon
represents. The two softkeys are membrane buttons
whose function correlates with the screen content to
the immediate left of the button.
25, and
3A3453H