Graco E-Flo DC Series Instructions Manual page 19

Table Table 4 4 4 Module Table Module Module Keys Keys Keys
Membrane Keys
Membrane Membrane
Press to toggle between Run screens
and Setup screens.
Error Reset:
Use to clear alarm after cause
has been fixed. When there is no alarm to
clear, this key will set the active pump's
profile to Stop. Also used to cancel data
entered and return to original data.
Up/Down Arrows:
screens or fields on a screen, or to increment
or decrement the digits in a settable field.
Softkeys:
Use varies by screen.
See columns at right.
3A3453H
Keys
Keys
Use to move between
Enter Screen. Highlight data that can be edited. Also changes
the function of the Up/Down arrows so they move between
data fields on the screen, rather than between screens.
Exit Screen.
Enter.
Press to activate a field for editing or to accept
the highlighted selection on a dropdown menu.
Right.
Move to the right when editing number fields. Press
again to accept the entry when all digits are correct.
Reset.
Activate Profile.
default, and only appears if the Profile
is checked on.
Press to activate the profile just edited.
Softkeys
Softkeys Softkeys
Exit data editing.
Reset totalizer to zero.
This softkey is disabled by
Profile Lock
Profile
Setup Screen 14, page
Operation
Lock box
Lock
40.
19