Siemens SINAMICS S120 Manual page 60

Mechanical installation
3.3 Installing
Assembly
1. Glue the sealing strip to the cabinet frames of the cabinets to be connected.
2. Push the cabinets together, they must come completely together both at the front and
rear sides. The distance between the cabinets must be approximately 3 mm.
3. Attach the cabinet connectors to the outside and inside corresponding to the subsequent
drawing.
4. If necessary, reattach the protective covers and doors. The ground connections must also
be attached to the doors.
Figure 3-14 Positions of the cabinet connectors
60
Cabinet Modules liquid cooled
Manual, 10/2015, A5E37067587A