Using The Memory Card - Siemens SINAMICS S120 Manual

9.19.10.1

Using the memory card

Description
The STARTER commissioning tool is used to store configuration data centrally on the
memory card. This ensures that if the Control Unit is defective, it can be simply replaced
without the loss of any data. It also enables data to be stored on external storage media.
The data on the memory card can also be accessed using a CompactFlash card reader
connected to a PC. This card reader is not included in the scope of supply.
System requirements for installing STARTER V4.4
Hardware
The following minimum requirements must be met:
● Programming unit (PG) or PC
● Pentium III, at least 1 GHz, (> 1 GHz recommended)
● 1 GB RAM (2 GB recommended)
● Screen resolution 1024 × 768 pixels, 16-bit color depth
● Free hard disk space > 3 GB
Software
The following minimum requirements must be met when using STARTER without an existing
STEP 7 installation:
● Microsoft Internet Explorer V6.0 or higher
32-bit operating systems:
● Microsoft Windows Server 2003 SP2
● Microsoft Windows Server 2008
● Microsoft Windows XP Professional SP2
● Microsoft Windows 7 Professional incl. SP1
● Microsoft Windows 7 Ultimate incl. SP1
● Microsoft Windows 7 Enterprise incl. SP1 (standard installation)
64-bit operating systems:
● Microsoft Windows 7 Professional SP1
● Microsoft Windows 7 Ultimate SP1
● Microsoft Windows 7 Enterprise SP1 (standard installation)
● Microsoft Windows Server 2008 R2
restricted test scope
*)
Cabinet Modules liquid cooled
Manual, 10/2015, A5E37067587A
9.19 K90, Control Unit CU320-2 DP
and SP3
*)
Options
355