G20, Cbc10 Communication Board - Siemens SINAMICS S120 Manual
Cabinet modules liquid-cooled
Hide thumbs
Also See for SINAMICS S120:
- Function manual (1094 pages) ,
- Diagnostic manual (947 pages) ,
- Manual (848 pages)
Table of Contents
Advertisement
Options
9.3 G20, CBC10 Communication Board
9.3
G20, CBC10 Communication Board
Availability of option
This option is available for the following S120 Cabinet Modules:
● Basic Line Connection Modules
● Active Line Connection Modules
● Motor Modules
Description
Figure 9-1
The CBC10 CANopen communication board (CAN Communication Board) is used to
connect drives in the SINAMICS drive system to higher-level automation systems with a
CAN bus.
The CANopen Option Board uses two 9-pin SUB D connectors for the connection to the
CAN bus system.
The connectors can be used as inputs or outputs. Unused pins are plated through.
The following baud rates are also supported:
10, 20, 50, 125, 250, 500, 800 kBaud and 1 MBaud.
The module is installed in the factory in the option slot of the CU320-2 Control Unit.
284
CAN CBC10 Communication Board
Cabinet Modules liquid cooled
Manual, 10/2015, A5E37067587A
Advertisement
Table of Contents
