Lifting The Cabinet Units Off The Transport Pallet And Installing Them - Siemens SINAMICS S120 Manual
Cabinet modules liquid-cooled
Hide thumbs
Also See for SINAMICS S120:
- Function manual (1094 pages) ,
- Diagnostic manual (947 pages) ,
- Manual (848 pages)
Table of Contents
Advertisement
NOTICE
Screw connections for protective covers
The threaded connections for the protective covers made of Makrolon may only be
tightened with 2.5 Nm.
3.3.3
Lifting the cabinet units off the transport pallet and installing them
The applicable local guidelines regarding the transportation of the cabinet from the transport
pallet to the installation location must be observed.
A crane transport assembly (option M90) can also be fitted on the top of the cabinet.
The fixing screws of the transport pallets can be removed without having to lift the cabinet
unit. The positions of the fixing screws are indicated by red markings on the outside of the
pallets.
Figure 3-7
For cabinet units without base (in the figure on the left), the fixing screws of the transport
pallets must be removed from the lower side of the pallet.
For cabinet units with base (in the figure on the right), the fixing screws of the transport pallet
are accessible only after the cover is opened. They can then be loosened and removed
directly from the front.
Cabinet Modules liquid cooled
Manual, 10/2015, A5E37067587A
Lifting from the transport pallet (left: without base; right: with base)
Mechanical installation
3.3 Installing
53
Advertisement
Table of Contents
