F546
Speed 7 Operation Time
Program ⇒ Pattern Run ⇒ Operation Time
This parameter sets the run-time for Preset Speed #7.
This time is effective when used with Group Speeds and non-Group Speeds.
If the Auto-Restart function is activated, the search time required for the Auto-
Restart function will be subtracted from the Operation Time setting; resulting
in a shorter run time.
Speed 8 Operation Time
Program ⇒ Pattern Run ⇒ Operation Time
This parameter sets the run-time for Preset Speed #8.
This time is effective when used with Group Speeds and non-Group Speeds.
If the Auto-Restart function is activated, the search time required for the Auto-
Restart function will be subtracted from the Operation Time setting; resulting
in a shorter run time.
Speed 9 Operation Time
Program ⇒ Pattern Run ⇒ Operation Time
This parameter sets the run-time for Preset Speed #9
This time is effective when used with Group Speeds and non-Group Speeds.
If the Auto-Restart function is activated, the search time required for the Auto-
Restart function will be subtracted from the Operation Time setting; resulting
in a shorter run time.
Speed 10 Operation Time
Program ⇒ Pattern Run ⇒ Operation Time
This parameter sets the run-time for Preset Speed #10
This time is effective when used with Group Speeds and non-Group Speeds.
If the Auto-Restart function is activated, the search time required for the Auto-
Restart function will be subtracted from the Operation Time setting; resulting
in a shorter run time.
Speed 11 Operation Time
Program ⇒ Pattern Run ⇒ Operation Time
This parameter sets the run-time for Preset Speed #11
This time is effective when used with Group Speeds and non-Group Speeds.
If the Auto-Restart function is activated, the search time required for the Auto-
Restart function will be subtracted from the Operation Time setting; resulting
in a shorter run time.
Speed 12 Operation Time
Program ⇒ Pattern Run ⇒ Operation Time
This parameter sets the run-time for Preset Speed #12
This time is effective when used with Group Speeds and non-Group Speeds.
If the Auto-Restart function is activated, the search time required for the Auto-
Restart function will be subtracted from the Operation Time setting; resulting
in a shorter run time.
178
Direct Access Number — F546
Parameter Type — Numerical
Factory Default — 5.0
Changeable During Run — Yes
Minimum — 0.1
Maximum — 6000.0
Units —
F520
Setting
Direct Access Number — F547
Parameter Type — Numerical
Factory Default — 5.0
Changeable During Run — Yes
Minimum — 0.1
Maximum — 6000.0
Units —
F520
Setting
Direct Access Number — F548
Parameter Type — Numerical
Factory Default — 5.0
Changeable During Run — Yes
Minimum — 0.1
Maximum — 6000.0
Units —
F520
Setting
Direct Access Number — F549
Parameter Type — Numerical
Factory Default — 5.0
Changeable During Run — Yes
Minimum — 0.1
Maximum — 6000.0
Units —
F520
Setting
Direct Access Number — F550
Parameter Type — Numerical
Factory Default — 5.0
Changeable During Run — Yes
Minimum — 0.1
Maximum — 6000.0
Units —
F520
Setting
Direct Access Number — F551
Parameter Type — Numerical
Factory Default — 5.0
Changeable During Run — Yes
Minimum — 0.1
Maximum — 6000.0
Units —
F520
Setting
H9 ASD Installation and Operation Manual
F551