Connecting Pipes - Huawei NetCol5000-C Series User Manual

Simple configuration in-row chilled water smart cooling product
Hide thumbs Also See for NetCol5000-C Series:
Table of Contents

Advertisement

NetCol5000-C030 In-row Chilled Water Smart Cooling
Product
User Manual (Simple Configuration)
Procedure
Step 1 Loosen the two screws shown by (1) in
Do not take off the screws.
Figure 3-26 Relocating the air deflector
Step 2 Remove one screw shown by (2) in
Step 3 Rotate the air deflector by 60 degrees. After adjusting the direction, install the screw you
removed in the other reserved hole and tighten the other two screws, as shown by (3) and (4)
in
Figure
----End

3.11 Connecting Pipes

The humidifier water inlet pipe connects to running water or any other water supply system,
and the drainpipe connects to the drainage system.
Issue 09 (2020-01-10)
3-26.
Copyright © Huawei Technologies Co., Ltd.
Figure
3-26.
Figure
3-26.
3 Installation
53

Advertisement

Table of Contents
loading

Table of Contents