Huawei NetCol5000-C Series User Manual page 100

NetCol5000-C030 In-row Chilled Water Smart Cooling
Product
User Manual (Simple Configuration)
4.
Step 5 Click the text box after SNMP Port, as shown in
port number, click
Figure 4-14 Setting SNMP port
SNMP Port is set to 161 by default.
If you modify SNMP Port and click Submit, a warning is displayed, saying that the
monitoring system will restart, as shown in
Figure 4-15 Changing an SNMP port
Step 6 Click Next Page.
Step 7 Set SNMP trap parameters.
1.
2.
Issue 09 (2020-01-10)
Click Submit.
, and then click Submit.
Click Add under SNMP Trap.
Set Trap Address as planned and Trap Port to the actual port number, and then
click , as shown in Figure
Copyright © Huawei Technologies Co., Ltd.
Figure 4-14. Set SNMP Port to the actual
Figure 4-15.
4-16.
4 ACC Introduction
91