How To View Teamwork Control Information - Huawei NetCol5000-C Series User Manual

NetCol5000-C030 In-row Chilled Water Smart Cooling
Product
User Manual (Simple Configuration)
Figure 4-50 Enabling a humidity and temperature sensor
----End

4.5.8 How to View Teamwork Control Information

Procedure
Step 1 On the home screen, choose
shown in
Figure 4-51 Teamwork control information screen
----End
Issue 09 (2020-01-10)
Figure 4-51.

Master/Slave and Active/Standby indicate the information of this single unit. Other information is
about the teamwork control information of the group.
 Required cooling capacity: indicates the total cooling/heating requirements of the group and is used
as a reference for enabling the cooling/heating mode by the master device. If the cascade function is
enabled, the capacity is used as a reference for determining whether to start a standby unit.
 Required humidity: indicates the total dehumidification and humidification requirements of the
group and is used as a reference for enabling the dehumidification and humidification mode by the
master device.
Copyright © Huawei Technologies Co., Ltd.
> . The teamwork control information is displayed, as
4 ACC Introduction
124