NetCol5000-C030 In-row Chilled Water Smart Cooling
Product
User Manual (Simple Configuration)
3.11.1 (Optional) Installing the Humidifier Water Inlet Pipe
Prerequisites
Recommended materials: water inlet pipe, adapter, and connector sealing glue.
The water inlet pipe can be connected for a humidifier in two ways, as shown in
Context
This section applies only to models with humidifiers.
Procedure
Step 1 Cut off the ties securing the water inlet pipe, and put the water inlet pipe connector through
the equipment from the bottom or top.
Figure 3-27 Humidifier water inlet pipe
Step 2 Apply sealing glue to the adapter threads, and install the adapter at the water inlet pipe
connector.
Step 3 Connect pipes to the adapter and verify that the connections are secure.
----End
Issue 09 (2020-01-10)
Copyright © Huawei Technologies Co., Ltd.
3 Installation
Figure
3-8.
54