How To Import A Certificate And Key - Huawei NetCol5000-C Series User Manual

NetCol5000-C030 In-row Chilled Water Smart Cooling
Product
User Manual (Simple Configuration)


Step 2 Disconnect the main power supply of the smart cooling product.
Step 3 Check whether the E-label identification board is properly connected.


Step 4 Check whether cables are properly connected.


Step 5 Reconnect the main power supply of the smart cooling product.
Step 6 If the fault persists, contact Huawei technical support.
----End

4.5.12 How to Import a Certificate and Key

Prerequisites
You have obtained CA certificate file, local certificate file, and key file into a USB disk.



Procedure
Step 1 On the home page, choose Maint > USB Operations > Import Certificate, as shown in
Figure
Issue 09 (2020-01-10)
If yes, contact Huawei technical support.
If no, continue with Step
If no, reconnect the board properly and continue with
If yes, continue with Step
If yes, contact Huawei technical support to replace the E-label identification board.
If no, reconnect or replace cables and perform
You are advised to use the FAT32 USB flash drive with a capacity no greater than 64 GB.
Format the non-FAT32 USB flash drives into FAT32 ones before using them.
Ensure that the key file has been encrypted using AES128.
Before using a USB flash drive, ensure that its data has been scanned by antivirus software
and is secure.
4-57.
Copyright © Huawei Technologies Co., Ltd.
2.
4.
Step
4 ACC Introduction
Step 5.
5.
129