Huawei NetCol5000-C Series User Manual page 175

NetCol5000-C030 In-row Chilled Water Smart Cooling
Product
User Manual (Simple Configuration)
Figure 6-7 Removing condensate pump components
1.
2.
3.
4.
Pre-heat the forcible condensate drainpipe to facilitate removal.
5.
Step 5 Install a new condensate pump and connect cables in an inverse order.
Do not reversely connect the input cables to the pump.
Step 6 Install the air filters.
Step 7 Close and lock the rear door.
Issue 09 (2020-01-10)
Remove the two screws from the cover of the condensate pump using a Phillips
screwdriver and take off the cover.
Use a Phillips screwdriver to remove the four screws that secure the condensate pump.
Remove the control cables from the condensate pump.
Remove the forcible consulate drainpipe.
Take off the condensate pump.
Copyright © Huawei Technologies Co., Ltd.
6 System Operation and Maintenance
166