Lubrication; Lubrication System Of E-Mill 3Vs And 3Vsii - Acer e-mill 3VSII Operation Manual

5. LUBRICATION

Do not operate machine until properly lubricated:
(A)Way surfaces and lead screws (Sunoco waylube #80 or equivalent); one
pump daily.
(B)Milling head and spindle bearings (S.A.E. 10 or 10W light oil) ; weekly.
(C)Elevation screw (Shell Carnea Oil 41); twice weekly.
(D)Motors are greased for life of bearings.

5-1 Lubrication System of e-mill 3VS and 3VSII

Item# Part# Description
1 9001 Hand Oiler
3 9004 A4 Distributing Joint
5 9006 Flexible Oil Tube (410mm)
7 9005 Oil Check Valve-ST1
9 9007 Oil Check Valve-ST4
Item# Part# Description
2 9002 Aluminum Pipe (4mm)
4 9022 Elbow Joint
6 9024 A8 Distributing Joint
8 9008 Oil Check Valve-ST2
10 9010 Oil Check Valve-ST5
- 79 -