Configuration
8.3 Device configuration and configuration parameters in the TIA Portal
8.3.4
Configuration parameters
8.3.4.1
Configuration parameters for CIM and POM
The configuration parameters are directly assigned to the respective modules and are set
during device configuration. They are transferred automatically on start-up and during re-
parameterization.
Configuration parameters CIM
Description
Rated voltage for line voltage com-
pensation
Configuration control switched on
Configuration parameters POM4220 Lowend
Description
Control type
(setting once per POM)
Phase LX1
(setting once per POM)
Phase LX3
(setting once per POM)
Response to errors
(setting per channel)
108
Value range
The permitted value depends on the used POM versions,
•
see Line voltage compensation (Page 139).
No (default)
•
Yes
•
Value range
Half-wave control (default)
•
Connected (default)
•
Not connected
•
Connected (default)
•
Not connected
•
Channel substitute value 0 (default)
•
Channel value is retained
•
SIPLUS HCS4200 PROFINET/PROFIBUS DP
Operating Instructions, 07/2019, A5E35066204A/006