Service and maintenance
12.4 Replace fan
12.4
Replace fan
Safety guidelines
Electric shock hazard
The device is energized. Before you begin to replace components, you must:
• Switch off the power supply to the busbar system and secure it against reconnection.
• Disconnect the 24 V DC voltage supply and secure it against reconnection.
12.4.1
Replacing a FM4240 fan module
Tool
You will need a Torx T10 screwdriver
Preparations
Remove all the Power Output Modules that are located below the fan module. Refer to
section Replacing the POM4220 (Page 198) for instructions on removing a
Power Output Module.
194
WARNING
SIPLUS HCS4200 PROFINET/PROFIBUS DP
Operating Instructions, 07/2019, A5E35066204A/006