Siemens SIPLUS HCS Series Operating Instructions Manual page 67

Proceed as follows for each of the four fastening blocks:
Steps
1
2
3
SIPLUS HCS4200 PROFINET/PROFIBUS DP
Operating Instructions, 07/2019, A5E35066204A/006
Use the screwdriver to push out the fas-
①
tening block .
Position the fastening block in accordance
with the rail thickness (5 mm / 10 mm)
Push the fastening block back until it latch-
es in place.
5.10 Mounting a POM4320 power output module
Installation/mounting
65