Siemens SIPLUS HCS Series Operating Instructions Manual page 175

Data record 203 "Measured values" (HCS4200 with POM4220 Highend)
The data set describes a function of the POM4220 Highend and addresses one POM.
Byte
0, 1
...
14, 15
16, 17
...
30, 31
32, 33
34, 35
36, 37
38, 39
Only with connection type "2-pin switching", even without enabled fault current monitoring. The
1)
value is "0" for all other connection types.
The entire data record is always returned. The data record is answered with errors if no
POM4220 Highend is addressed.
Note
For the connection types "2-pin switching" and "economy circuit" measured values are only
relevant for channels 1 to 4.
SIPLUS HCS4200 PROFINET/PROFIBUS DP
Operating Instructions, 07/2019, A5E35066204A/006
Description
Current channel 1 (in [A] with two decimal places)
...
Current channel 8 (in [A] with two decimal places)
Power channel 1 (in [W])
...
Power channel 8 (in [W])
Fault current channel 1/5 in mA
Fault current channel 2/6 in mA
Fault current channel 3/7 in mA
Fault current channel 4/8 in mA
1)
1)
1)
1)
Communications
10.2 Acyclic data exchange
173