Connecting The Profinet/Profibus Fieldbus - Siemens SIPLUS HCS Series Operating Instructions Manual

Connecting

6.4 Connecting the PROFINET/PROFIBUS fieldbus

6.4 Connecting the PROFINET/PROFIBUS fieldbus
Connecting PROFINET
CIM PROFINET connection X1 and X2
Connect PROFIBUS and set the PROFIBUS address
CIM PROFIBUS connection X1
76
Connect X1 and X2 to the higher-level controller and/or the next
PROFINET device using an Ethernet cable according to the
PROFINET specification.
Assign the PROFIBUS address using the S1 and S2 address
•
selector switches.
Addresses can be set from 0 to 99.
Connect X1 to the higher-level controller and/or the next
•
PROFIBUS device via cable in accordance with the PROFIBUS
specification.
Operating Instructions, 07/2019, A5E35066204A/006
SIPLUS HCS4200 PROFINET/PROFIBUS DP