Communication Via The Rs 232 Interface - Pepperl+Fuchs IC-KP2-2HB21-2V1D Manual

IC-KP2-2HB21-2V1D
Commands
Error messages sent by the bus connection
Status
7.3

Communication via the RS 232 interface

The serial RS 232 interface enables the quick and easy connection of the
IDENTControl Compact to a PC or PLC.
You can use the diagnostic function to retrieve information via the IDENTControl
Compact and the connected R/W heads. The information includes details such as
the device version, software date, type and version of the connected R/W head,
preset handheld parameters, and the tag type.
Any kind of terminal program can be used to control communication. We
recommend RFIDControl software, which is available from Pepperl+Fuchs free of
charge.
The following RS 232 interface parameters are fixed:
Baud rate 38 400, 8 data bits, 1 stop bit, no parity.
7.3.1 Command examples
Note!
Enter all commandswithout spaces!
1. Example: Set tag type
Tag type "99" is preset on delivery. The tag type is used which is stored on the
R/W head.
Send the command Change tag described in the Command table to select the
tag type IPC03 for the R/W head connected to channel 1.
You should receive one of the responses described in the Response table.
Command:
CT 1 03 # <CR>
CT
1
03
#
<CR>
78
Meaning
10h Reserved
20h Reserved
40h Incorrect or incomplete command or parameter not in the valid
range.
TCP/IP: The specified length of the message does not match the
actual length.
Change tag command
Channel 1
Tag type IPC03
End character
End character