See "Configuration Store (Cs) - Pepperl+Fuchs IC-KP2-2HB21-2V1D Manual

IC-KP2-2HB21-2V1D
Commands
configuration store (CS)
Command:
Byte
Byte 0
Byte 1
Byte 2
Byte 3
Byte 4
Byte 5
Byte 6
Byte 7
Response:
Byte
Byte 0
Byte 1
Byte 2
Byte 3
Byte 4
Byte 5
Byte 6
Byte 7
The configuration store (CS) command allows you to store the last command sent
to the R/W head in the non-volatile memory of the IDENTControl Compact. The
R/W head executes the command automatically again if the power supply is
interrupted or the IDENTControl Compact is reset.
<Mode>='1' activates the mode.
<Mode>='0' deactivates the mode.
Configuration store is deactivated by default.
34
Content
Control byte
Reserved
Command code - 17
h
Reserved
Mode
Not used
Not used
Not used
Content
Control byte
Reserved
Command code - 17
h
Reserved
Status
Reply counter
Not used
Not used
Bit no.
7 6 5 4 3
0 0 0 0 0
0 0 0 0 0
0 0 0 1 0
0 0 0 0 0
<Mode>
- - - - -
- - - - -
- - - - -
Bit no.
7 6 5 4 3
0 0 0 0 0
0 0 0 0 0
0 0 0 1 0
0 0 0 0 0
<Status>
<ReplyCounter>
- - - - -
- - - - -
2 1 0
D U U
S M S
0 0 0
1 1 1
0 0 0
- - -
- - -
- - -
2 1 0
D U U
S M S
0 0 0
1 1 1
0 0 0
- - -
- - -