Cable Length Between Control Interface And R/W Heads - Pepperl+Fuchs IDENTControl IC-KP-B5-V23 Manual

IC-KP-B5-V23
Installation
1
Compatible R/W heads see chapter 4.3.1 and compatible connecting cables see
chapter 4.7.1.
5.4.3

Cable length between control interface and R/W heads

The maximum cable length between the control interface and a connected R/W
head is 1000 meters. If you wish to attain the maximum possible cable length,
select a suitably large cable cross-section. see chapter 4.7.1
5.4.4 Ground connection
The ground connection of the IDENTControl is located at the lower right of the
connector array. The ground conductor is screwed to the housing with a crimp
connector. In order to guarantee safe grounding, the serrated washer must be
mounted between the crimp connector and the housing.
1
2
3
4
A cross-section of at least 4 mm
16
2
1
2
3
3
4
5
5
4
1 2
Housing
Serrated lock washer
Crimp connector
Lock screw
+
A signal
-
B
3 4
2
is recommended for the ground conductor lead.
trigger switch
+
-