Safety - Pepperl+Fuchs IC-KP2-2HB21-2V1D Manual

Identcontrol compact control interface with interface for ethercat
Hide thumbs Also See for IC-KP2-2HB21-2V1D:
Table of Contents

Advertisement

IC-KP2-2HB21-2V1D

Safety

3
Safety
3.1
Symbols relevant to safety
Danger!
This symbol indicates a warning about an immediate possible danger.
In case of ignoring the consequences may range from personal injury to death.
Warning!
This symbol indicates a warning about a possible fault or danger.
In case of ignoring the consequences may cause personal injury or heaviest
property damage.
Caution!
This symbol indicates a warning about a possible fault.
In case of ignoring the devices and any connected facilities or systems may be
interrupted or fail completely.
3.2
Intended Use
The IDENTControl Compact IC-KP2-2HB21-2V1 is a control interface designed
for identification systems with an integral EtherCAT interface. The
IDENTControl Compact can be used as a control cabinet module or for field
applications. You can connect suitable inductive read/write heads, UHF antennas,
or trigger sensors to the IDENTControl Compact. However, wiring suitable for the
system design must always be used.
Read through these instructions thoroughly. Familiarize yourself with the device
before installing, mounting, or operating.
Always operate the device as described in these instructions to ensure that the
device and connected systems function correctly. The protection of operating
personnel and plant is only guaranteed if the device is operated in accordance
with its intended use.
3.3
General notes on safety
Only instructed specialist staff may operate the device in accordance with the
operating manual.
User modification and or repair are dangerous and will void the warranty and
exclude the manufacturer from any liability. If serious faults occur, stop using the
device. Secure the device against inadvertent operation. In the event of repairs,
return the device to your local Pepperl+Fuchs representative or sales office.
The connection of the device and maintenance work when live may only be
carried out by a qualified electrical specialist.
The operating company bears responsibility for observing locally applicable
safety regulations.
7

Advertisement

Table of Contents
loading

Table of Contents