22 D 16 See "Reset (Rs) - Pepperl+Fuchs IC-KP2-2HB21-2V1D Manual

IC-KP2-2HB21-2V1D
Commands
reset (RS)
Command:
Byte
Byte 0
Byte 1
Byte 2
Byte 3
Byte 4
Byte 5
Byte 6
Byte 7
This command terminates all active commands. The device settings are reloaded
from the non-volatile memory.
There is no response to the reset command. The handshake bits of the control
byte are operated until the device performs a hardware reset and restarts.
This command terminates all active commands. The device settings are reloaded
from the non-volatile memory.
This confirmation is issued for this command (status FFh) instead of a response.
The device resets the hardware and then restarts.
Content
Control byte
Reserved
Command code - 16
h
Reserved
Not used
Not used
Not used
Not used
Bit no.
7 6 5 4 3
0 0 0 0 0
0 0 0 0 0
0 0 0 1 0
0 0 0 0 0
- - - - -
- - - - -
- - - - -
- - - - -
2 1 0
D U U
S M S
0 0 0
1 1 0
0 0 0
- - -
- - -
- - -
- - -
35