El6652-0010 - Configuration Parameters - Beckhoff EL6652-00 0 Series Documentation

5.6.2

EL6652-0010 - Configuration parameters

Index 0x8000 Slave Settings
Index Name
8000:0 slave settings
8000:1 Slave Number
8000:3 Product Name
8000:4 Device Type
8000:5 Vendor ID
8000:6 Product Code
8000:7 Revision
8000:8 Serial Number
8000:20 MAC address
8000:21 IP address
8000:22 Network Mask
8000:23 Gateway Adress
8000:24 DHCP Max Retries
8000:25 TCP/IP TTL
8000:26 TCP/IP UDP Checksum
8000:27 TCP/IP TCP Timeout
8000:28 MultiCast TTL
8000:29 MultiCast UDP Checksum
8000:2A Forward Class3 to PLC
8000:2B Advanced Slave Options
EL6652-00x0
Meaning
Slave Box ID
Name of the device
Device type
Vendor number
Product code
Version
Serial number (see object 0x9000)
MAC address (see object 0x9000)
= 0 means DHCP enabled, any other value results in
fixed IP Address
= 0 means DHCP enabled, any other value results in
fixed SubNetMask
= 0 means DHCP enabled, any other value results in
fixed Gateway Address
0-infinite (number of dhcp retries (actually only infinite
retries implemented)
Time to live for Unicast TCP/UDP Communication
0-UDP Checksum disabled, 1-UDP Checksum enabled
Tcp Idle Timout in seconds (0-Timout disabled)
Time to live for Multicast UDP Communication
0-UDP Checksum disabled, 1-UDP Checksum enabled
Forward Explicit Messaging to PLC (actually not
implemented)
Store Category (Bit9=Cat2, Bit8=Cat1) see Writing the
IP address from the PLC [} 94]
Version: 2.5
Commissioning
115