Disable Or Enable Group Errors - Siemens SIRIUS 3RW5 PROFIBUS Equipment Manual

7.6

Disable or enable group errors

With the parameter "Group error", you determine whether interrupts (error interrupts) are
transmitted via PROFIBUS. Group errors are released in the factory settings and alarms
(error alarms) are transferred.
Setting options
You can disable or enable transmission of error interrupts (group error) via the bus
connection in the following ways:
● Configuration software of the controller, e.g. STEP 7
● User program via data set 131 (Page 129)
● SIRIUS Soft Starter ES (TIA Portal) Premium /
Professional via 3RW5 communication module
Brief overview: Window "Project Navigation" with current project under created
Soft Starter > "Parameters" >Window "Work area" > "Communication module >
Group error"
Further information on the operation of SIRIUS Soft Starter ES (TIA Portal) can be found
in the online help of SIRIUS Soft Starter ES (TIA Portal).
● SIRIUS Soft Starter ES (TIA Portal) via local interface on the 3RW5 HMI High Feature
Brief overview: See SIRIUS Soft Starter ES (TIA Portal) Premium /
Professional via 3RW5 communication module
● 3RW5 HMI High Feature (Page 100)
SIRIUS 3RW5 PROFIBUS communication module
Equipment Manual, 02/2020, A5E35633549002A/RS-AC/003
Messages and diagnostics
7.6 Disable or enable group errors
99