Chapter6 Appendix; Specifications; Machine Specifications - MIMAKI JV300-130 A Operation Manual

Chapter6 Appendix

Specifications

Machine specifications

Item
Method
Print head
Specification
Printing mode (scan x feed)
Usable inks
Ink supply
Capacity of ink cartridge
Usable media
Max. printing width
Maximum
Minimum
Thickness
Roll outside
diameter
Roll weight
Roll Media size
*2
Roll inside
diameter
Printing sur-
face
Roll end treat-
ment
Maximum
Leaf media size
Minimum
Leaf media
Margin
Roll media
Absolute accu-
racy
Distance accuracy
Reproducibility
Perpendicularity
Media skew
Head height adjustment
Cutting of media
Waste ink tank
Print data
transfer
Interface
E-mail function
Command
during standby
during continu-
ous printing
Noise
during discon-
tinuous print-
ing
6-2
JV300-130 A
Drop-on-demand piezoelectric print heads
2 head staggered
360×360dpi/ 540×360dpi/ 540×720dpi/ 720×1080dpi/ 720×1440dpi/ 1440x1440dpi
Sublimation dye ink (Sb) : 6-colors (Y, M, Bl, K or Dk, Lbl, Lm)
Supplying from ink cartridges through tubes.Ink cartridge replacement type :
Supplying by Toggle switch over with 2 cartridges/color (4-colors ink set)
Y, M, Bl, K, Dk, Lbl, Lm : 440cc cartridge
Photo-paper , Synthetic paper , Duplex paper
1361mm (53.6in)
1371mm (54.0in)
210mm (8.3in)
1.0mm or less (0.04in or less)
Paper media : Φ250mm or less (Φ9.8in or less)
*1
Other media : Φ210mm or less (Φ8.3in or less)
*1,
40kg or less (88.2lb or less)
2 or 3 inches
Side facing outward
The roll end is gently fixed to the core with weak-adhesive tape or weak glue for easy
removal.
1371mm (54.0in)
210mm (8.3in)
Left end and right end : 15 mm (0.6 in) (Default)
Front :120 mm (4.7 in) Rear : 150 mm (5.9 in)
Left end and right end : 15 mm (0.6 in) (Default)
Front :120 mm (4.7 in) Rear : 150 mm (5.9 in)
Whichever the larger one of ± 0.3 mm (0.01 in) or ± 0.3% of the designated
Whichever the larger one of ± 0.2 mm (0.008 in) or ± 0.1% of the designated
± 0.5 mm / 1000 mm (± 0.02 in / 39.4 in)
5 mm or less / 10 m (0.2 in or less / 32.8 ft)
Select for manual 3-stage (2.0/2.5/3.0) + 1 mm (0.04 in) or + 2 mm (0.08 in) at instal-
lation. Base height can be raised.
Cutting of Y direction by the head cutter. Cutting accuracy (steps) : 0.5 mm or less.
(0.02 in or less.)
Bottle type (2,000 cc)
USB 2.0
Ethernet 10 BASE-T / 100 BASE-TX / 1000BASE-T
MRL- V
Less than 58 dB (A) (FAST-A, Front & Rear & Left & Right 1 m (3.3ft))
Less than 65 dB (A)
*3
Less than 70 dB (A)
JV300-160 A JV300-130 A Plus JV300-160 A Plus
1610mm (63.4in) 1361mm (53.6in)
1620mm (63.8in) 1371mm (54.0in)
45kg(99.2 lb) or less
1620mm (63.8in) 1371mm (54.0in)
USB 2.0 、Ethernet 1000BASE-T
1610mm (63.4in)
1620mm (63.8in)
1620mm (63.8in)