Maintenance Menus At-A-Glance - MIMAKI JV300-130 A Operation Manual

Chapter 4 Maintenance

MAINTENANCE MENUs at-a-glance

Item
For carrying out maintenance on the carriage and station periphery.
CARRIAGE OUT
(
NOZZLE WASH
(
STATION
DISWAY WASH
MAINTENANCE
(
CUSTODY WASH
(
WIPER EXCHANGE
(
For having the various maintenance functions executed automatically. Set the execution interval for each
maintenance function.
REFRESH
AUTO
MAINTENANCE
CLEANING
( P.4-12)
CLEANING TYPE
INK FILLING
Supplies ink to correct nozzle clogging.
( P.4-13)
INK TANK
EXCHANGE Resets or corrects the used count for the waste ink tank.
( P.4-16)
4-6
Set value
P.4-7)
1 to 99min
P.4-8)
P.4-9)
1 to 99min
P.4-9)
P.4-14)
The set value will
differ according
to the ink type
being used.
NORMAL/ SOFT/
HARD
Meaning
Moves the carriage out, for carrying out cleaning of the cap periphery,
head, wipers, etc.
Soaks the nozzle surfaces in maintenance cleaning fluid, for carrying
out recovery from nozzle clogging or bent.
Executes washing of the suction pump tubes.
Carried out when the machine is going to be out of use for an extended
period. Washes the nozzles and tubes beforehand, to keep the
machine in fine condition.
Used when replacing the wiper. If the wiper is replaced, the number of
times the wiper was used that is managed in this device is reset.
For setting the activation interval for refresh.
For setting the activation interval for head cleaning.
For setting the type of head cleaning.