Setting A Auto Power-Off; Setting A Auto Power-On - MIMAKI JV300-130 A Operation Manual

Chapter 3 Machine setting
Function name
Server Setup
( P.3-17)
EVENT MAIL
Transmit Test
( P.3-18)
Auto Remote
(Plus series)
( P.3-19)
RESET( P.3-19)
*1. Settable when both of DHCP and AutoIP are [OFF]
*2. Settable only when Auth. is not OFF
*3. Settable only when Auth. is POP before SMTP

Setting a AUTO Power-off

When no operation has been performed for the set time,
the power supply is automatically turned "OFF".
Press the
1
key in LOCAL.
• MACHINE SETUP MENU will be displayed.
Press
2
OFF", and press the
Press
3
press the
• Set Value : none, 10 to 600min
Press the
4
to end the setting.

Setting a AUTO Power-on

 Applicable model: Plus series (FW Ver.1.30 or
later)
The machine starts automatically at the set day of the
week and time.
Combining the "AUTO Power-on" setting with the heater
setting shortens the waiting time until print preparation.
• If you want to turn off the power automatically,
use the "AUTO Power-off" function.
Press the
1
key in local mode.
• MACHINE SETUP MENU will be displayed.
Press
2
ON", and press the
With "SETUP" selected, press the
3
key.
Press
4
press the
• Set Value: ON/ OFF
ON: Auto Power-on
OFF: Not Auto Power-on
3-12
Set value
*3
POP3 Address
APOP *3
Send the test e-mail.
ON / OFF
(MENU) (twice)
to select "AUTO POWER
key.
to select a set value, and
key.
key several times
(twice )
(MENU)
to select "AUTO POWER
key.
to select a set value, and
key.
Default
- Set the POP server.
- Set ON/ OFF of APOP.
When data is received in the local mode, it
ON automatically switches to the remote mode and
sets whether to start printing.
All setting values are returned to the status
-
default.
Press to select "Time", and press
5
the key.
Press
6
power-on time and press the
• Set Value: 0:00 to 23:59 (24 hour system, 1
minute unit)
: Change in hours.
: Change in minutes.
Press to select "Day", and press
7
the key.
Press to select the day of the
8
week to change the setting, and press
key to switch ON/OFF.
• Set Value: ON/ OFF (Each day of the week)
ON: Auto power-on on the specified day of the
week.
OFF: Do not turn on auto power-on the specified
day of the week.
After setting ON/OFF for all days, press the
9
key.
Press the
10
end the setting.
Meaning
to set the auto
key.
key several times to