Automatic Remote; Initializing The Settings - MIMAKI JV300-130 A Operation Manual

Automatic remote

 Applicable model: Plus series (FW Ver.1.30 or
later)
When data is received in local mode, it automatically
switches to remote mode and starts printing.
Press (MENU)
1
key in local mode.
• MACHINE SETUP MENU will be displayed.
(>>) .
Press
2
Press to select "Auto Remote",
3
then press the
Press to select "ON/OFF", then
4
press the
• ON: When data is received in local mode, it
automatically shifts to REMOTE and starts
printing.
• OFF: Remote transfer by pressing.
Press the
5
end the setting.

Initializing the Settings

You can return the setting of "SETUP", "MAINTENANCE"
and "MACHINE SETUP" to the status before shipment.
Press the
1
key in LOCAL.
• MACHINE SETUP MENU will be displayed.
Press the
2
Press
3
press the
Press the
4
• The already configured settings are initialized.
Press the
5
to end the setting.
(twice )
key.
key.
key several times to
(MENU) (twice)
(>>) .
to select "RESET", and
key.
key.
key several times
Chapter 3 Machine setting
1
2
3
4
5
6
3-19