Automatic Maintenance Function; Setting The Refreshing Intervals - MIMAKI JV300-130 A Operation Manual

Chapter 4 Maintenance
Use a clean stick soaked in maintenance
5
cleaning fluid to wipe ink off the head
surface or other surfaces.
• Never rub the nozzles.
Clean the side surface of the head
(shown in deep gray) with a clean stick.
The nozzle part (Never
touch it.)
Clean with a clean stick or a waste cloth.
Press the
6
Close the maintenance cover, and press
7
the
• After its initial operation, the machine returns to
LOCAL.
Automatic Maintenance
Function
To use this machine comfortably, you can set various
maintenances to be performed automatically.
Here, set performing intervals of various automatic
maintenances.
You can prevent troubles such as ink clogging by
performing automatic maintenance periodically (automatic
maintenance function).
For the auto maintenance functions, the following items
can be set:
• When you perform maintenance manually, after
manual maintenance is completed and when time
set with the automatic maintenance function has
passed, maintenance starts automatically.
4-12
key after the cleaning.
key.
Function name
The interval between each refreshing
REFRESH
operation is set.
The interval between each cleaning operation
CLEANING (Interval)
is set.
CLEANING (Type) The cleaning type is set.
• If the "Check waste ink" warning message is
displayed, the operation set in the auto
maintenance function is not carried out. Perform
the operations of P.4-15 "Replace the waste ink
tank with another" if required.
• When the power switch on the front of the machine
is turned off, check the waste ink tank.

Setting the Refreshing Intervals

The interval between each operation of ejecting a small
amount of ink from the nozzles to prevent nozzle clogging
is set.
Press the
1
key in LOCAL.
• MAINTENANCE MENU will be displayed.
Press , and press the
2
• "AUTO MAINTENANCE" will be selected.
Press the
3
• "REFRESH" will be selected.
Press
4
interval, and press the
• Set value : The set value will differ according to
the ink type being used.
Press the
5
to end the setting.
Descriptions
(MENU)
key.
key.
to set the refreshing
key.
key several times