Table of Contents
Advertisement
SECTION 2 - PREPARATION AND INSPECTION
level indicator is clean, secure and responds to move-
ment.
3. Base - Platform Emergency Lowering Tool - Check
that the platform emergency lowering tool is in place
on the base frame and in good working order.
4. Mast Assembly(s) - (Check both mast assemblies on
the FT140 model) No cracks or corrosion, especially
around base of mast; no excess wear, kinks, nicks or
damage; slide pad running surfaces smooth and
unobstructed; free of dirt or debris.
Parent Metal Crack
Figure 2-1. Examples of cracks
5. Platform Latch Assembly - With platform not
mounted to mast, inspect the mast pin mounts and
their connections for any signs of damage. If no dam-
age is present to the mounts, with platform mounted
to mast, check that latch assembly is engaged with
2-4
Weld Crack
LIFTPOD by JLG
4
5
1
Figure 2-2. Daily Walk-Around Inspection
(Sheet 1 of 2)
2
3
3121296
Advertisement
Table of Contents
