Table of Contents
Advertisement
SECTION 6 - SERVICE/MAINTENANCE AND REPLACEMENT PARTS
6.4
SERVICING AND MAINTENANCE GUIDELINES
General
The following information is provided to assist you in the use
and application of service and maintenance procedures con-
tained in this chapter.
WHEN AN ABNORMAL CONDITION IS NOTED AND PROCEDURES CONTAINED
HEREIN DO NOT SPECIFICALLY RELATE TO THE NOTED IRREGULARITY, WORK
SHOULD BE STOPPED AND TECHNICALLY QUALIFIED GUIDANCE OBTAINED
BEFORE WORK IS RESUMED.
Safety and Workmanship
Your safety, and that of others, is the first consideration when
engaging in the maintenance of equipment. Always be con-
scious of moving components and pinch points. Do not allow
heavy objects to rest in an unstable position. When raising a
portion of the equipment, ensure that adequate support is pro-
vided.
Cleanliness
The most important single item in preserving the long service
life of a machine is to keep dirt and foreign materials out of the
vital components. Precautions have been taken to safeguard
6-8
against this. However, these items must be maintained on a
scheduled basis in order to function properly.
Component Disassembly and Reassembly
When disassembling or reassembling a component, complete
the procedural steps in sequence. Do not partially disassemble
or assemble one part, then start on another. Always recheck
your work to assure that nothing has been overlooked. Do not
make any adjustments, other than those recommended, with-
out obtaining proper approval.
LIFTPOD by JLG
3121296
Advertisement
Table of Contents
