Table of Contents
Advertisement
Tool Tray Pre-Start Inspection
Prior to use of the tool tray, check the following:
• Tool tray is seated securely on the platform top and side
rails and resting on the mast top carry handle.
• No cracks or bends in tray.
• Both of the straps are securely attached to the platform
side rails (See Figure 2-6.).
• Decals are in place and legible.
Maximum Load: The maximum permissible load on the tool
tray is 33 lb. (15kg) evenly distributed.
3121296
SECTION 2 - PREPARATION AND INSPECTION
2
1
1. Tray Attach Straps
Figure 2-6. Tool Tray Installation
LIFTPOD by JLG
2
1
2. Decals
2-7
Advertisement
Table of Contents
