Table of Contents
Advertisement
Inspection and Maintenance Codes:
1. Check for proper and secure installation
2. No gouges, excessive wear, or dents showing
3. Visually inspect for excessive wear, damage, cracks, or distortion
4. Check for cracked or broken welds
5. Check area is clean and free of debris
6. Check for proper adjustment
7. Check proper operation
8. Check returns to neutral or "off" position when released
3121296
SECTION 6 - SERVICE/MAINTENANCE AND REPLACEMENT PARTS
Table 6-1. Preventative Maintenance & Inspection Schedule
LIFTPOD by JLG
9. Check for signs of leakage
10. Check for wear and/or proper routing
11. Check for proper tolerances
12. Check proper and authorized compo-
nents installed
13. Verify
14. Perform
15. Replace
16. Lubricate per instructions in Section 6.6
on page 6-18
6-7
Advertisement
Table of Contents
