Table of Contents
Advertisement
Crushing and Collision Hazards
• Approved head gear must be worn by all operating and
ground personnel.
• Watch for obstructions around machine and overhead
when driving. Check clearances above, on sides, and bot-
tom of platform when lifting or lowering platform.
• During operation, keep all body parts inside platform rail-
ing.
• Keep non-operating personnel at least 6 ft. (1.8m) away
from machine during all operations.
• When moving the machine, the operator must limit travel
speed according to conditions of ground surface, conges-
3121296
tion, visibility, slope, location of personnel, and other fac-
tors.
• Exercise extreme caution at all times to prevent obstacles
from striking or interfering with operating controls and per-
sons in the platform.
• Ensure that operators of other overhead and floor level
machines are aware of the aerial work platform's presence.
Disconnect power to overhead cranes. Barricade floor area
if necessary.
• Do not operate over ground personnel. Warn personnel not
to work, stand, or walk under a raised platform. Position
barricades on floor as necessary.
LIFTPOD by JLG
SECTION 1 - SAFETY PRECAUTIONS
1-9
Advertisement
Table of Contents
