Adjustments Required - Keysight Technologies N9010B EXA Installation Note

Mxa signal analyzer option b40, 40 mhz analysis bandwidth and microwave preselector bypass (mpb) upgrade kit

Hide thumbs Also See for N9010B EXA:

Table of Contents

Utilities, Adjustments, and Performance Verification Tests

Calibration software and specified test equipment is required to perform the adjustments and

performance verification testing. Information on how to obtain this software can be found at

http://www.keysight.com/find/calibrationsoftware

Utilities Required

— None

Adjustments Required

The following adjustments are the minimum set required to ensure that the newly installed

hardware is functioning properly.

— Perform all adjustments

Performance Tests Required

The following performance verification tests are the minimum set required to ensure that this newly

installed option is functioning properly.

— Perform all performance tests

A full calibration is required to assure the instrument meets all specifications

The end user must ultimately determine whether they want a full calibration to be performed after

the installation of this upgrade or not. If a full calibration is required, arrangements regarding the

level of the calibration must be made between the end user and the calibration provider.

For assistance, get in touch with your nearest Keysight Technologies Sales and Service Office. To

find your local Keysight office access the following URL, or if in the United States, call the following

telephone number:

http://www.keysight.com/find/assist

1-800-829-4444 (8am-8pm EST Monday -Friday)

Installation Note N9020-90253

Table of Contents

N9020b