Keysight Technologies N9010B EXA Installation Note page 19

Mxa signal analyzer option b40, 40 mhz analysis bandwidth and microwave preselector bypass (mpb) upgrade kit

Hide thumbs Also See for N9010B EXA:

Table of Contents

2. Refer to

Figure

7. Pull the front frame carefully away from the chassis. Remove the ribbon

cable W1 from the A8 Motherboard.

Figure 7

Front Panel Cable

3. If the instrument has Option BBA (BBIQ inputs), there will be an additional cable (W24) that

will need to be removed. W24 connects to the A18 BBIQ Interface Board. Pull the Front Frame

Assembly carefully away from the chassis. Remove the ribbon cable W1 from the

motherboard.

Installation Note N9020-90253

W1 may have locking springs on each side. Depress the spring on each side of the connector to

remove from the motherboard.

Installation Procedure

Table of Contents

N9020b