Installation Procedure
3. Refer to
Figure
14. Locate one of the two coaxial switches (N1810-60069) (1) and the PS
Bypass Switch 1 Bracket (E4410-00104) (2) in the kit.
Figure 14
Switch 1 Placement
4. Mount the switch with the Keysight label facing up.
5. Attach the bracket and switch to the low band switch bracket using two
(3) included in the kit using the T-8 driver. Do not torque the screws at this time.
26
0515-1992
screws
Installation Note N9020-90253