Keysight Technologies N9010B EXA Installation Note page 11

Licensing the New Options
License Installation Procedure over USB
1. This upgrade kit includes an Option Upgrade Entitlement Certificate (5964-5178) and a
Preselector Bypass Upgrade Entitlement Certificate (5972-3380). Depending upon the
frequency range of the analyzer, either one or both of these Entitlement Certificates will be
used.
2. If the analyzer has frequency range option 503, redeem only the N9010BU-B40 or
N9020BU-B40 (as appropriate) product listed on the Option Upgrade Entitlement Certificate
(5964-5178) by following the instructions on the Certificate.
3. If the analyzer has a frequency range option of 507, 508, 513, or 526, redeem the
N9010BU-B40 or N9020BU-B40 (as appropriate) product listed on the Option Upgrade
Entitlement Certificate (5964-5178) and the N9010BU-BUP or N9020BU-BUP (as appropriate)
product listed on the Preselector Bypass Upgrade Entitlement Certificate (5972-3380) by
following the instructions on each Certificate.
4. After redeeming the upgrade products from the Certificate(s), you will receive one or two
e-mails, each with an attached License File.
5. Locate a USB storage device. Perform a virus scan on this device before use.
6. Save the License File(s) to the root directory of the USB Storage Device.
7. Connect the USB Storage Device to one of the analyzer's USB ports. Connect a mouse to
another USB port. Windows will detect the new hardware and may display the configuration
menu shown in Figure
Figure 1 USB Storage Device Configuration Menu
Installation Note N9020-90253
1. This menu may be configured according to your preferences.
Installation Procedure
11