Fitting The Intermediate Gearbox - Fein BOZ 32-4M Repair Instructions

Rotary Drills
Fitting

9.2.2 Fitting the intermediate gearbox

Steps that must be completed:
- Fitting the armature
Tools:
- Arbor press
- Sleeve
11 mm inner diameter, 18 mm outer diameter
- 26 mm diameter support
1
3
C-SC_CSSM
2
4
5
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
1. Press in the grooved ball bearing (1).
2. Position the circlip (3).
3. Press the armature (3) into the intermediate gearbox (4).
4. Position the bearing bush (5).
01.01.2019 Page 34 of 47