Fitting The Handle - Fein BOZ 32-4M Repair Instructions

Rotary Drills
Fitting

9.2.7 Fitting the handle

Steps that must be completed:
- Fitting the stator
- Fitting the electronic components
- Fitting the network cable
Tools:
- PH2 cross-tip screwdriver
C-SC_CSSM
1
2
3
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
1. Position the handle half shell (1).
2. Screw in the screw (2).
3. Screw in the two screws (3).
4. Repeat step 3 on the opposite side of the machine.
01.01.2019 Page 41 of 47