Removing The Carbon Brushes - Fein BOZ 32-4M Repair Instructions

Rotary Drills
Removal

8.2 Removing the carbon brushes

Tools:
- PH2 cross-tip screwdriver
- Slotted screwdriver
1
2
4
3
C-SC_CSSM
5
6
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
1. Unscrew the four sheet metal screws (1).
2. Remove the cover (2).
3. Loosen the screw (3).
4. Disconnect the cable (4).
5. Lift the spring (5) to one side.
6. Remove the carbon brush (6).
7. Repeat steps 3 to 6 on the opposite side of the machine.
01.01.2019 Page 13 of 47