Rotary Drills
Removal
8.3.7 Removing the intermediate gear box
Steps that must be completed:
-
Removing the carbon brushes
-
Removing the gearbox housing
-
Removing the intermediate gear box
Tools:
-
Circlip pliers
-
Arbor press
3
4
C-SC_CSSM
1
2
5
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
1.
Remove the circlip (1).
2.
Press the armature (2) out of the intermediate gearbox
(3).
3.
Remove the circlip (4).
4.
Press out the grooved ball bearing (5).
I
NFORMATION
The grooved ball bearing (5) is damaged during removal and
must be replaced.
01.01.2019
Page 20 of 47