Rotary Drills
Removal
8.3.9 Removing the network cable
Steps that must be completed:
-
Removing the carbon brushes
-
Removing the handle
-
Removing the electronic components
-
Removing the electronics
-
Removing the stator
Tools:
-
PH2 cross-tip screwdriver
3
4
2
C-SC_CSSM
1
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
1.
Unscrew the two screws (1).
2.
Remove the cable clamping piece (2).
3.
Remove the cable (3).
4.
Remove the cable grommet (4).
01.01.2019
Page 22 of 47