Removing The Clutch And Shafts - Fein BOZ 32-4M Repair Instructions

Rotary Drills
Removal

8.4.3 Removing the clutch and shafts

Steps that must be completed:
- Removing the carbon brushes
- Removing the intermediate gear box
Tools:
- Circlip pliers
- Arbor press
- Sleeve
54 mm inner diameter, 64 mm outer diameter;
28 mm outer diameter, 105 mm height;
31 mm inner diameter, 37 mm outer diameter, 105 mm height
1
2
3
C-SC_CSSM
4
4
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
1. Remove the shaft with disc (1).
2. Remove the selector shaft (2).
3. Remove the shaft (3).
4. Remove the selector shaft (4).
5. Remove the bearing (5).
01.01.2019 Page 25 of 47