Rotary Drills
Fitting
9.1.1 Fitting the clutch and shafts
1
2
3
4
5
6
C-SC_CSSM
10.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
5.
Position the disc (1).
I
NFORMATION
Note the position of the disc.
The projection must point upwards.
6.
Position the circlip (2).
7.
Press in the grooved ball bearing (3).
8.
Press in the gear-wheel (4).
9.
Press in the feather key (5).
Position the circlip (6).
01.01.2019
Page 29 of 47