Positioning The Gearbox Housing - Fein BOZ 32-4M Repair Instructions

Rotary Drills
Fitting

9.2.9 Positioning the gearbox housing

Steps that must be completed:
- Fitting the clutch and shafts
- Fitting the switch pushbutton
- Fitting the gearbox parts
- Fitting the armature
- Fitting the intermediate gearbox
- Positioning the intermediate gearbox
- Fitting the stator
Tools:
- PH2 cross-tip screwdriver
2
C-SC_CSSM
1
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
1. Position the gearbox housing (1).
2. Screw in the two screws (2).
3. Repeat step 2 on the opposite side of the machine.
01.01.2019 Page 43 of 47